Wrist Mounted Catapult 3D Printer Model
The file 'Wrist Mounted Catapult 3D Printer Model' is (stl) file type, size is 1.1MB.
The file 'Wrist Mounted Catapult 3D Printer Model' is (stl) file type, size is 1.1MB.
This is a little wrist-mounted catapult. Handy if you want to catapult small things at a moments notice.
There are several parts that make up the catapult, and a wristband for it to be affixed to. Probably best to be printed in PLA. I've not tried any other materials with this, but I've heard springs are better in PLA, so at least make sure that the spring is PLA.
The wristband/bracelet should be gently flexed to help separate the links. They should bend enough to complete a circle, but don't bend them too sharply or it'll snap. There are some test pieces if you wish to try them before doing the whole thing.
| Base_v3.stl | 312.1KB | |
| Catapult_wrist_strap_L.stl | 2.1MB | |
| Catapult_wrist_strap_smaller.stl | 1.7MB | |
| Pin_v4.stl | 684.0B | |
| posts.stl | 35.6KB | |
| spring_v4.stl | 130.1KB | |
| test_inner.stl | 114.9KB | |
| test_links.stl | 477.6KB | |
| test_outer.stl | 109.4KB | |
| trigger_v4.stl | 12.5KB |
