Wrench Set 4 – 15 Mm (1/8 – 5/8″) – Set Of 7, 13 Sizes, Fully Functional 3D Printer Model Free Download

Description Files (7)

Summary

Set of 7 Open-End Wrenches 4 - 15 mm (spaced 1 mm + 5.5 mm), Fully Functional

UPDATE: I have added a 5.5 mm wrench (for M3)

I had (once again) misplaced my 8 mm wrench, so decided to make a few more... :-D

I guess the most obvious question will be, are they functional?
-Yes, definitely! They work surprisingly well.
No, they are no good for changing the tires on your 4WD but work really well for DIY and all kinds of in-house repairs etc.

FILAMENT

Use something really strong (PLA in this case is better than e.g. PETG, which may be too flexible). I use this easy to print Carbon Fiber PLA , which gives a really tough print. Of course the wrenches look even better in silk silver or bronze PLA, but will likely not be as strong.

PRINTING
Printing is super easy. No supports needed. I use 80% infill and 0.25 mm layers. Printing time for the full set should be somewhere around 3 hrs.

I really hope you like the design and find it useful. If you feel like tipping (thanks in advance), rather than clicking the "Tip Designer" button, PLEASE donate to people in need. These people will need any help they can get (a lot more than I do)! THANKS!!

HOPE YOU LIKE THEM, AND IF YOU LIKE THEM, PLEASE LIKE THEM. THANKS!

Enjoy and happy printing!

Wrench_10-11mm_V4.stl	1.2MB
Wrench_12-13mm_V4.stl	1.8MB
Wrench_14-15mm_V4.stl	1.5MB
Wrench_4-5mm_V4.stl	1.7MB
Wrench_55mm_V4.stl	1.3MB
Wrench_6-7mm_V4.stl	963.9KB
Wrench_8-9mm_V4.stl	1.7MB