Dear WPL consumer, thanks for downloading my first rim made for 3d printing.

My tiny lipo burned out, better pictures when i get new ones and have time for a photo sesh outside

I designed this the initial rim as a replacement cap for a 1/10 Gmade beadlock, but i really wanted a set for my C54.

So i fired up the old CAD software and got to painting.

Big thanks to Mark Aka Small Scale Adventures for the reference, was a big help having one of your rims to look at while designing. And again for all the files and content you provide for the community!

WPL fans, WPL employees and RC fans in general also gets a thank you, because why not.

So this rim will require you to print with support, i recommend using regular support set to everywhere.

I printed mine in PLA+ and added a color change in Cura. I attached a screenshot with my color change settings. If you dont have filament or want to deal with a color change then, might i suggest you find yourself a red permanent marker.
Layer height 0.2 and the first layer at 0.28.
You want ironing enabled for maximum flatness.
And lastly id instead of using infill just print more walls, i usually do that if i want a solid model.

2 versions of the rim included, one with studs n' nuts that print with the model and one with sepperate bolts.
Bolts come in a sepperate model so you can print them in a different color and glue em in place, thin part fits into the hole on the rim quite nicely.

Keep being awesome, and support genuine WPL Stores, Edward get us that damn EU warehouse! :D <3

-Yurisminator/trx4xtracab