WPL C24 C14 Electronics Tray 3D Printer Model
The file 'WPL C24 C14 Electronics Tray 3D Printer Model' is (stl) file type, size is 290.8KB.
The file 'WPL C24 C14 Electronics Tray 3D Printer Model' is (stl) file type, size is 290.8KB.
Here is an electronics tray I designed for my WPL C24 Toyota Hilux rockcrawler. It is designed to be able to use the stock rtr electronics or to provide extra room for aftermarket. The version with shocktowers are for custom shocks that I built. You can see those shocks at https://youtu.be/vLlPK9BzvTo The version without shock towers I haven't built, but should work with stock shocks although the inner fender may need some trimming. All holes will need to be located and drilled for your application. I use the stock servo hold down with the lower bosses cut off. The body latches will need to be located as well if you decide to use them.
| WPL_C-24_C-14_body_latches.stl | 405.5KB | |
| WPL_c24_c14_electronics_tray_no_shockmount_v4.1.stl | 78.1KB | |
| WPL_c24_electronics_tray_with_shocktower_v3.4.stl | 399.4KB |
