Because I don't like gluing the tires to the wheel, I came up with this simple design.
My goal was scale authentic look beadlock wheel.
Beadlock wheels for 1:16 scale WPL B36 truck.
The offset is almost identical to the original wheels.
Requires 6 M2x20 bolts per wheel for assembly. Bolts screw in directly.
You should be very careful tightening the bolts, as excess force may cause the back part to break.
This model is to be used by hobbyists, not commercial purposes.
| Wheel_WPL_Back.stl | 228.6KB | |
| Wheel_WPL_Face.stl | 660.9KB | |
| Wheel_WPL_Inner_Ring.stl | 50.1KB |
