WORX Landroid M Tire 3D Printer Model
The file 'WORX Landroid M Tire 3D Printer Model' is (stl) file type, size is 475.8KB.
The file 'WORX Landroid M Tire 3D Printer Model' is (stl) file type, size is 475.8KB.
After 4 years of hard work the tires of my Worx Landroid M700 (WR142E) were worn out. Couldn't find a place to buy just the tires, only the complete wheels are sold everywhere.
I decided to create my own tire and so I did. It's almost like the well known original offroad wheels made my Worx. Just pull the old tires from the rim and put the new ones on.
This tires only work if you print them in TPU. You'll need the flexibility of TPU to get them on the rim!
When printing you'll need supports for the upper edge, the profile should print fine without support.
There are two versions: One with a 12.5mm profile depth and one with 17.5mm. I'm pretty happy with the 12.5mm version for now but the deeper profile may be handy in special circumstances.
Tire should fit on the following models:
Landroid S300 (WR130E)
Landroid M500 (WR141E)
Landroid M500 Plus (WR165E)
Landroid M700 (WR142E)
Landroid M700 Plus (WR167E)
Landroid M1000 (WR143E)
and all other models with 180mm rim
If you're interested in other profiles just let me know. I can try to implement your ideas.
If you like my design please leave me a heart :-)
Maybe you could consider to tip the designer for his "hard work" and the "endless hours invested" ;-)
| Landroid_M_Tire_125.stl | 1012.9KB | |
| Landroid_M_Tire_175.stl | 994.1KB |
