This is a Worm gearbox with a reduction ratio of 1:60
The intersecting axis distance is 31 mm
It's a very simplified version without bearings, however it's a working model
Is better lubricate with a bit of grease the transmission gears if you want to provide high speed on the input shaft (for example a drill)
(you need n°2 gear_shaft.stl)
| case_A.STL | 295.0KB | |
| case_B.STL | 228.7KB | |
| GEAR.STL | 1.2MB | |
| GEAR_SHAFT.STL | 61.2KB | |
| WORM.STL | 1.9MB |
