Presented worm gear reducer with module 1.5 and 60x10 (6:1) teeth on driven gear and minimalistic frame that hold all details together. Also included motor adapter that I used to connect motor to worm part. All details connected using M4 bolts and nuts.
| Case.SLDPRT | 847.5KB | |
| Case_Left_Side.STL | 57.9KB | |
| Case_Right_Side.STL | 60.2KB | |
| M15_-_Gear_60_teeth_x_20mm_-_With_Holes.SLDPRT | 6.6MB | |
| M15_-_Worm_20x28_mm_-_With_Hole.SLDPRT | 613.0KB | |
| M15_-_Worm_20x28_mm_-_With_Hole.STL | 992.7KB | |
| Metric_-_Spur_gear_2M_10T_20PA_7FW_---S10N75H50L4N.sldprt | 692.5KB | |
| Metric_-_Spur_gear_2M_10T_20PA_7FW_---S10N75H50L5N.sldprt | 697.0KB | |
| Motor_Gear_Connector_Sliced_-_2.SLDPRT | 317.5KB | |
| Motor_Gear_Connector_Sliced_-_2.STL | 32.7KB | |
| Worm_Gear_-_M1.5_with_60_teeth_x_20mm_with_M2_10_teeth_gear.SLDASM | 637.5KB | |
| Worm_Gear_-_M1.5_with_60_teeth_x_20mm_with_M2_10_teeth_gear_Flat_Spokes.STL | 1.3MB | |
| Worm_Gear_-_M1.5_with_60_teeth_x_20mm_with_M2_10_teeth_gear_Round_Spokes.STL | 1.4MB |
