World Of Warcraft Lithophane Frame 3D Printer Model
The file 'World Of Warcraft Lithophane Frame 3D Printer Model' is (stl,STL) file type, size is 217.0MB.
The file 'World Of Warcraft Lithophane Frame 3D Printer Model' is (stl,STL) file type, size is 217.0MB.
Here's a project that took me around a week to complete all on 1 printer. the three bottom lithophanes are eSUN PLA+ Cool White with 6000k backlighting, Varok (Orc) has a yellow/greenish transparency behind him. Ragnaros on the top was printed with colorFabb PLA/PHA Standard White and is lit with 2000k Warm light (no transparency). .1 resolution on all prints.
Some of the basic settings I used are as follows:
.1 layer height
Accel values all set to 400
Jerk values set to 8
Print speed: 35mm/s
No infill, just multiple walls to fill the inside.
Everyone's printer will be slightly different so adjust accordingly. Each of these prints took anywhere from 20-30 hours to print.
If you’re interested in seeing more of my lithophanes or want to read up on print settings/STL generators please feel free to check out my
website: https://www.gameon3d.com/
and/or come checkout my
Facebook page: https://www.facebook.com/GameOn3D.
Thank you!
| 2x4_lithophane_plug_adapter.stl | 1.7MB | |
| Draenei_Warrior_PS_0_1to1res.STL | 133.6MB | |
| Litchking_stl.stl | 199.3MB | |
| Rag_7vpp.pngW247H175T3V7B0A0C0NS.stl | 202.9MB | |
| Varok_Saurfang.stl | 124.4MB |
