“Working” Toy Revolver – Signalis Einhorn 3D Printer Model
The file '“Working” Toy Revolver – Signalis Einhorn 3D Printer Model' is (stl) file type, size is 1.3MB.
The file '“Working” Toy Revolver – Signalis Einhorn 3D Printer Model' is (stl) file type, size is 1.3MB.
WARNING: Brandishing things that look like weapons is illegal, and unethical. Do not use anything that looks like a weapon to frighten others, do not bring it outside.
A satisfying fidget toy - pull the trigger, load and eject rounds, press-fit bullets together, hear the click as you pull of the hammer, learn flip-tricks, play 'russian roulette', obey the rule of 6!
Note that this toy doesn't 'shoot' anything.
Also, makers beware - I am no engineer, and this is not the simplest model to assemble. Please, if you would like to improve the model to make it easier to build, ot have a smoother action, to better fit the in-game model, etc - please do! I'd love to see remixes.
My final build only correctly cycles, say, half the time - so there is much improvement to be made.
I did not require any sanding or rescaling for my prints - but ymmv depending on your printer tolerances.
Onshape CAD here.
You may want a wire to shape into a hook or poker to help routing the rubber band during assembly. (you could design one to 3d print, if needed).
No screws or springs needed, just pennies for weight (optional), glue, snips of filament, and cheap hair bands (such as these - I got mine from dollar store).
Feel free to skip the 'centerer'. It was designed to help hold the cylinder in the center when closed, but ended up being more fiddlety, and not necessary - at least for me.
I only had time to do a rudimentary paint job - you can likely get a better result from adding the proper insignia and symbols.
This revolver is from the video game 'Signalis', and was as close a fit as I could manage with my limited CAD skills. It is based off of the Chiappa Rhino 200DS and the RSh-12 real-world revolvers, among others.
| Einhorn_-_advancer-arm.stl | 32.4KB | |
| Einhorn_-_advancer.stl | 39.3KB | |
| Einhorn_-_arm.stl | 73.3KB | |
| Einhorn_-_arrester.stl | 39.2KB | |
| Einhorn_-_barrel.stl | 22.7KB | |
| Einhorn_-_body-left.stl | 133.0KB | |
| Einhorn_-_body-middle.stl | 481.4KB | |
| Einhorn_-_body-right.stl | 299.1KB | |
| Einhorn_-_bullet.stl | 244.7KB | |
| Einhorn_-_casing.stl | 68.1KB | |
| Einhorn_-_centerer.stl | 41.5KB | |
| Einhorn_-_crane-hinge.stl | 22.7KB | |
| Einhorn_-_cylinder.stl | 210.4KB | |
| Einhorn_-_extractor-plate.stl | 95.0KB | |
| Einhorn_-_extractor-pump.stl | 102.0KB | |
| Einhorn_-_extractor.stl | 41.9KB | |
| Einhorn_-_grip-back.stl | 438.5KB | |
| Einhorn_-_grip-connector.stl | 143.4KB | |
| Einhorn_-_grip.stl | 437.2KB | |
| Einhorn_-_hammer-arm.stl | 25.4KB | |
| Einhorn_-_hammer.stl | 29.8KB | |
| Einhorn_-_laser.stl | 71.2KB | |
| Einhorn_-_test-body-left.stl | 96.2KB | |
| Einhorn_-_test-body-middle.stl | 387.3KB | |
| Einhorn_-_test-body-right.stl | 206.8KB | |
| Einhorn_-_test-grip-back.stl | 110.8KB | |
| Einhorn_-_test-grip-connection.stl | 69.8KB | |
| Einhorn_-_test-grip.stl | 110.9KB | |
| Einhorn_-_trigger.stl | 49.2KB |
