This is a working ball robot model whose internal mechanism is very similar to Sphero.
It is 96 mm wide and its easy to asemble and fast to print and you can open and close the sphere without removing any screw.
I will complete the existing instructions soon.
Scroll down for almost complete instructions!
More projects here: https://juangg-projects.blogspot.ca
| Battery_Holder.stl | 57.3KB | |
| DivingWheel_InnerPartx2.stl | 47.7KB | |
| DrivingWheels_SiliconeMould.stl | 207.3KB | |
| Frame.stl | 86.0KB | |
| Frame_Arcx2.stl | 99.2KB | |
| Frame_Upper.stl | 28.8KB | |
| Gear_Bigx2.stl | 113.7KB | |
| Gear_Smallx2.stl | 48.9KB | |
| Head.stl | 2.9MB | |
| Head_Base.stl | 88.9KB | |
| Head_Wheel.stl | 87.8KB | |
| Magnet_support.stl | 21.4KB | |
| Open_Source_BB8_sketch.ino | 3.1KB | |
| PCB.xps | 59.4KB | |
| SideWheelsx2.stl | 149.3KB | |
| SideWheels_Shaftx2.stl | 4.8KB | |
| Sphere_ax2.stl | 143.2KB | |
| Sphere_b.stl | 204.7KB | |
| Sphere_c.stl | 203.7KB |
