Working 2 Rotor Wankel Engine 3D Printer Model
The file 'Working 2 Rotor Wankel Engine 3D Printer Model' is (docx,stl) file type, size is 12.5MB.
The file 'Working 2 Rotor Wankel Engine 3D Printer Model' is (docx,stl) file type, size is 12.5MB.
This is a rotary engine or Wankel engine with 2 rotors and a turbocharger. You can power this engine with air.
For the assembly there is a little sanding and gluing required. For detailed information on how to put this engine together, read the PDF.
2mm thick metal wire
1 2x RotorHousing
2 1x RotorHousingCover(1)
3 1x RotorHousingCover(2)
4 1x RotorHousingCover(2.2)
5 1x RotorHousingCover(2.2)GUIDE
6 1x MiddlePlate
7 4x pins
8 1x Intake
9 1x TurboCharger(1)
10 1x TurboCharger(2)
11 1x TurboCharger(3)
12 1x ExenterShaft(1)
13 1x ExenterShaft(2)
14 1x ExenterShaft(3)
15 1x ExenterShaft(4)
16 1x ExenterShaft(5)
17 1x ExenterShaft(6)
18 1x ExenterShaft(7)
19 1x ExenterShaftGUIDE
20 2x Rotor
21 1x Stand
The tolerances used are tight so drilling and sanding may be required in some places.
| assembly_Wankel.docx | 5.8MB | |
| ExenterShaft1.stl | 132.7KB | |
| ExenterShaft2.stl | 577.2KB | |
| ExenterShaft3.stl | 472.8KB | |
| ExenterShaft4.stl | 645.2KB | |
| ExenterShaft5.stl | 472.8KB | |
| ExenterShaft6.stl | 581.9KB | |
| ExenterShaft7.stl | 4.1MB | |
| ExenterShaftGUIDE.stl | 81.9KB | |
| Intake.stl | 1.4MB | |
| MiddlePlate.stl | 907.1KB | |
| pins.stl | 248.9KB | |
| Rotor.stl | 1.5MB | |
| RotorHousing.stl | 3.2MB | |
| RotorHousingCover1.stl | 1.1MB | |
| RotorHousingCover2.2.stl | 307.8KB | |
| RotorHousingCover2.2GUIDE.stl | 70.4KB | |
| RotorHousingCover2.stl | 1.1MB | |
| Stand.stl | 406.9KB | |
| TurboCharger1.stl | 2.2MB | |
| TurboCharger2.stl | 1.0MB | |
| TurboCharger3.stl | 1.3MB |
