Workbee Z-axis Independent Dust Shoe – 63mm Dust Hose 3D Printer Model
The file 'Workbee Z-axis Independent Dust Shoe – 63mm Dust Hose 3D Printer Model' is (skp,stl) file type, size is 20.7MB.
The file 'Workbee Z-axis Independent Dust Shoe – 63mm Dust Hose 3D Printer Model' is (skp,stl) file type, size is 20.7MB.
Taking Nico_IMP3D's excellent original design, I've made a few tweaks:
Closing off the top of the dust shoe to facilitate printing entire project without needing to cut a seperate perspex window
A few geometry tweaks to reduce internal sharp edges (ie: less likely to foul up)
Hose attachment enlarged to accept 63mm dust hose
Added mechanical retaining clips to push-secure shoe into bracket
Will print this next week and edit this remix with photos and any adjustments required!
| All_Components.skp | 3.2MB | |
| Dust_Shoe.skp | 2.8MB | |
| Dust_Shoe.stl | 442.5KB | |
| Left_Bracket.skp | 2.2MB | |
| Left_Bracket.stl | 78.8KB | |
| Left_Mount.skp | 2.2MB | |
| Left_Mount.stl | 82.6KB | |
| Rear_Slide.skp | 2.2MB | |
| Rear_Slide.stl | 68.8KB | |
| Rear_Slide_Insert.skp | 2.2MB | |
| Rear_Slide_Insert.stl | 70.6KB | |
| Right_Bracket.skp | 2.2MB | |
| Right_Bracket.stl | 78.8KB | |
| Right_Mount.skp | 2.2MB | |
| Right_Mount.stl | 82.6KB | |
| Screw.skp | 2.2MB | |
| Screw.stl | 143.4KB |
