WOPR Computer Model 3D Printer Model
The file 'WOPR Computer Model 3D Printer Model' is (stl) file type, size is 361.2KB.
The file 'WOPR Computer Model 3D Printer Model' is (stl) file type, size is 361.2KB.
This is a model of the WOPR computer from War Games. The model was manually reconstructed by watching the same 39 seconds of the film over and over again. I took a few liberties in the rebuild.
(1) The recessed hatches and/or the overall length are not quite to scale (there actually should be a group of four rivets after the pair of panels).
(2) The real movie prop has a bit of an overhang at the floor, whereas I made the sides go straight down to the floor for easier MakerBot and RepRap printing.
(3) I made no attempt to model das blinkenlights.
(4) I only reproduced the large text.
(5) There may be an Easter Egg inside the hollow base for fans of TRON.
Slightly more detail on my blog: http://netninja.com/2012/08/03/is-that-a-wopr-in-your-pocket/
| WOPR-large-v01.stl | 1.4MB | |
| WOPR-small-v01.stl | 1.4MB | |
| WOPR-solid-large-v01.stl | 1.2MB | |
| WOPR-solid-small-v01.stl | 1.2MB |
