Wooden Train Bridge Supports – Alphabet (6mm Letters, 2 Or 4mm Joiner Plate) 3D Printer Model
The file 'Wooden Train Bridge Supports – Alphabet (6mm Letters, 2 Or 4mm Joiner Plate) 3D Printer Model' is (stl) file type, size is 114.60 KB.
The file 'Wooden Train Bridge Supports – Alphabet (6mm Letters, 2 Or 4mm Joiner Plate) 3D Printer Model' is (stl) file type, size is 114.60 KB.
This is a set of letter supports with a track joiner. With the letter and joiner the support is 64mm high under the track. This works with the current bridges I have purchase but you should check for bridge ramp height or supports. You can scale the letters to support a different height.
Measure your current bridge support height
The letters are 60mm high and the joiner base plate is 2mm or 4mm. I based this height off a Thomas bridge I have which is 64mm but others have 62mm. A discrepancy of a couple millimeters should not be a problem.
| A_Pillar.stl |
| B_Pillar.stl |
| C_Pillar.stl |
| D_Pillar.stl |
| E_Pillar.stl |
| F_Pillar.stl |
| G_Pillar.stl |
| H_Pillar.stl |
| I_Pillar.stl |
| Joiner_2mm.stl |
| Joiner_4mm.stl |
| J_Pillar.stl |
| K_Pillar.stl |
| L_Pillar.stl |
| M_Pillar.stl |
| N_Pillar.stl |
| O_Pillar.stl |
| P_Pillar.stl |
| Q_Pillar.stl |
| R_Pillar.stl |
| S_Pillar.stl |
| T_Pillar.stl |
| U_Pillar.stl |
| V_Pillar.stl |
| W_Pillar.stl |
| X_Pillar.stl |
| Y_Pillar.stl |
| Z_Pillar.stl |
