Wooden Pineapple Lamp (with STL) 3D Printer Model
The file 'Wooden Pineapple Lamp (with STL) 3D Printer Model' is (stl,dxf) file type, size is 118.2KB.
The file 'Wooden Pineapple Lamp (with STL) 3D Printer Model' is (stl,dxf) file type, size is 118.2KB.
After some web inspiration I created a nice pineapple like wooden lamp
to replace my christmas star in the living room :-)
For light I used an E14 Socket and a LED bulb.
It is made of 4mm plywood.
what you have to cut out:
2x upper ring
1x lower ring
12x rib 1
12x rib 2
12x leaf 1
24x leaf 2
24x leaf 3
24x leaf 4
48x leaf 5
to build it take the 2 upper rings and the lower ring and place the 24 ribs alternately around.
on rib 1 (6 leaf pockets) place leaf 1, 3, 5, 5, 4, 2 (from top to buttom)
on rib 2 (5 leaf pockets) place leaf 2, 4, 5, 5, 3 (from top to buttom)
If somebody want to print the lamp, i can also forward the STL files of all parts.
Have fun with my project :-)
| Blatt_1.stl | 18.4KB | |
| Blatt_2.stl | 21.6KB | |
| Blatt_3.stl | 23.5KB | |
| Blatt_4.stl | 25.1KB | |
| Blatt_5.stl | 26.6KB | |
| Leafs.dxf | 32.3KB | |
| Rings__Rips.dxf | 121.7KB | |
| ring_1.stl | 79.3KB | |
| ring_2.stl | 109.8KB | |
| Rippe_1.stl | 50.9KB | |
| Rippe_2.stl | 50.3KB |
