Wooden Painting Easel (based On 20 Mm Square Timbers) 3D Printer Model
The file 'Wooden Painting Easel (based On 20 Mm Square Timbers) 3D Printer Model' is (stl) file type, size is 51.0KB.
The file 'Wooden Painting Easel (based On 20 Mm Square Timbers) 3D Printer Model' is (stl) file type, size is 51.0KB.
A simple painting easel. Beyond being super cheap, it is also very stable, since there is a special zig-zag mechanism for arms locking. It also folds very nicely and occupies as much space as a spirit lever.
Despite the printable parts, you will also need ~2 meters of a 20 mm square timbers and a few M5 nuts with allen screws (with cylindrical head).
The project focuses on the head of the easel - it took a severe amount of time to develop a connection that will be strong, easily-printable, and that would maintain correct angles between arms when unfolded. Parts constituting a head of the easel are intended to be FDM-printed.
In addition I also upload so-called canvas holders. These were designed with SLA-printing in mind. The design is so simple that I highly encourage you to develop your own canvas holders suitable for FDM printers :)
The easel is customizable after assembly - to adjust the angle of the canvas, you can easily shorten the middle leg to increase it (which is usually a good idea from my experience).
Enjoy!
| canvas_holder_v2.stl | 41.3KB | |
| main_head_v2_final.stl | 48.3KB | |
| side_head_v2_play_final.stl | 37.1KB | |
| side_head_v2_play_symmetric_final.stl | 37.1KB |
