WOODEN HOUSE 3D Printer Model Download Free STL File

Description Files

Summary

PLEASE READ MY PROFILE BEFORE DOWNLOADING

I sincerely hope someone will find this useful.

WOODEN HOUSE OO scale.
This little house with its veranda all prints in one piece. No supports required but a brim is required to aid adhesion. I am pleased with the final print. I will upload another photo when I've painted it.

BASIC DETAILS
Please refer to print settings below.
The house is intended to represent weatherboard (horizontal planks) with corrugated iron roof built on stone blocks.
The veranda floor is intended to be wooden planks. The roof should look like corrugated iron.

DIMENSIONS (OO version) (approximately)

Height 104mm
Width 99mm
Depth 142mm (148mm on new version)
HO version is about 87.5% of the OO.

FILE VERSIONS

WoodenHouse-3. This is the version shown in my photos. It printed well for me.
WoodenHouse-4. A slightly modified version to emphasise the sheets of corrugated iron on the main roof. I have not printed this version.
WoodenHouse OO++. A further upgrade to improve the veranda, swap the chimney to the left side and add a small rear porch. Feedback please.
WoodenHouse HO. As above, scaled down to HO scale. (untested) Feedback please.

ERRORS and MODIFICATIONS

I didn't see any errors on my test print. However, if there are any issues, please let me know (politely) in the comments and I will attempt a fix.
I may be able to add extra versions or modifications if required. Please comment.

PAYMENT/TIPS
The World is struggling right now. If you feel motivated to tip, please consider donating to a deserving charity.

A REQUEST
Please don't print my designs for resale. My designs aren't great but I share them for free.

WoodenHouse-3.stl

WoodenHouse-4.stl

WoodenHouse_OO++.stl

Wooden_House_HO.stl

WOODEN HOUSE 3D Printer Model

Summary

Tags

You might also like