This is a wooden chandelier meant to be cut via a cnc machine or laser cutter from 5mm (5.1mm) plywood. I have also included the stl versions of each part for it to be 3D printed.
30x ribs are needed for the assembly. The attached dxf can be used to create a cut file.
This can use a standard lamp cord with a 40mm hole for the lamp installation.
| LAMP_9D_ASSEMBLY.stp | 486.9KB | |
| LOWER_RING.stl | 79.4KB | |
| UPPER_RING.stl | 64.3KB | |
| UPRIGHT.stl | 56.9KB |
