I printed on FDM ender 3 printer
my non-free models here - https://cults3d.com/en/users/Haridon/3d-models
be careful, you may need grinding tools for a perfect fit of the puzzle, in the model I made clearances in the puzzles, but problem may be plastic, and in the printer, I hope you will be fine))
Model content:
body(111mm)
cap(106mm)|
key(49mm)
part-1(19mm) - print 2 pieces
part-2(6mm) - print 2 pieces
part-3(25mm) - print 2 pieces
part-4(15mm) - print 2 pieces
part-5(21mm) - print 2 pieces
part-6(21mm) - print 2 pieces
part-7(15mm) - print 2 pieces
part-8(21mm) - print 2 pieces or 0:)
part-9(15mm) - print 4 pieces
part-10(38mm) - print 2 pieces or 1
| body111mm.stl | 17.8MB | |
| cap106mm.stl | 25.7MB | |
| key49mm.stl | 10.3MB | |
| part_1038mm.stl | 3.8MB | |
| part_119mm.stl | 5.6MB | |
| part_26mm.stl | 987.5KB | |
| part_325mm.stl | 2.4MB | |
| part_415mm.stl | 4.1MB | |
| part_521mm.stl | 1.7MB | |
| part_621mm.stl | 2.1MB | |
| part_715mm.stl | 2.4MB | |
| part_821mm.stl | 1.6MB | |
| part_915mm.stl | 2.5MB |
