V3 of my wood lathe, and probably the final version for a while. works really well! Ive turned 20cm long square blanks with no problem.
Video with more details: https://youtu.be/SEXzAz78ZC4
Build video: https://youtu.be/iUjqbcIMym0
making something on it: https://www.youtube.com/watch?v=sA_-kHdlTJE
A pretty extreme test on it: https://youtu.be/28JJMNb0_EA
Basic non printed parts list:
~=rough measurment, im away when writing this
6mm rod, for tool rest, ~28cm
5/32nd rod, for slide, 2-3, 27cm
Headstock:
er11 collet chuck, 5mm bore.
5mm rod, to mount collet chuck. ~10cm
4 10mm OD bearings, 5mm ID.
4 10cm lengths 3/16th threaded rod + 8 nuts
1m220mm bolt, or 2mm rod + glue
Tailstock:
2*10mm OD bearings, I use 6mm ID but you could use 5mm if thats easier
3mm thick aluminium plates, 3.
5mm *50mm bolts, 4, + 4 nuts
As said, ill be making a build video soon.
| 24cm_v_with_slot.stl | 1.5MB | |
| lathe_headstock_connector_v2.stl | 5.3MB | |
| lathe_headstock_v2.stl | 7.0MB | |
| lathe_head_template.stl | 521.0KB | |
| Lathe_new_back_stupport_block.stl | 4.8MB | |
| lathe_spacer_thin.stl | 163.4KB | |
| tailstock_cut_guide.stl | 90.3KB | |
| tailstock_v9.stl | 4.0MB | |
| triple_a_baby_oh.stl | 1.9MB | |
| t_rest_mount_v2_.stl | 614.5KB | |
| t_rest_stand_v1.stl | 2.3MB |
