Wolf Whistles… Easy And Fun Multi Pitch Whistles! 3D Printer Model
The file 'Wolf Whistles… Easy And Fun Multi Pitch Whistles! 3D Printer Model' is (stl) file type, size is 360.40 KB.
The file 'Wolf Whistles… Easy And Fun Multi Pitch Whistles! 3D Printer Model' is (stl) file type, size is 360.40 KB.
Wolf Whistles are a small, easy and 'loud' prints. Keep one handy all year round for sports, in case of emergencies and fun for Halloween or use them as a small low cost gift.
The outer chambers are a different length from the centre chamber so, when blown hard, make different pitch 'ear piercing' sounds. Combined they make a loud dual pitch whistle... or place a finger/s over the outer or centre holes to change the pitch.
There are plenty of 'whistles on Thingiverse however the Wolf Whistle is as much about a fun way to present a whistle as it is about producing an actual 'wolf whistle' but, with a bit of practice and experimentation with finger positions, you can achieve sounds representing a Wolf Whistle
There are two different Wolf Whistle stl's provided. One is for a standard whistle and the other includes a facility to place it onto a key ring.
For additional information please refer to the images and print setting.
Note: If you like this check out the rest of my fun and practical designs.
| FOB_Wolf_Whistle.stl |
| wolf_whistle.stl |
