This is version 2 of http://www.thingiverse.com/thing:1846315
If he gets out of hand, print this >> https://www.thingiverse.com/thing:3087440
I fixed the problem with the joints wearing out quickly. I redesigned the sockets so they are more flexible and should maintain a snug fit. Even if they do become loose over time, you can just put small rubber bands around the base of the sockets to tighten them up again.
If printed in PLA, you don't need rafts.
I included an ABS version with custom rafts (easier to remove) if you have a printer without a heated print plate.
I don't have a heated print plate, so I can't tell you how it would print with one (without rafts).
If you are printing the rafts version of the legs, they are already laid out for you.
If you are printing the non-rafts version, you can print the following:
HeadV4_Smoothed.stl
AbdomenV4_Smoothed.stl
Legs1_V3.stl
Legs2_V3.stl
Or if you want the parts separated, you can print the following:
4 - LegTipLongV2.stl (front and back)
4 - LegTipShortV2.stl (middle 2)
2 - LegMediumV3.stl (back)
6 - LegLongV3.stl (front and middle 2)
8 - LegShortV2.stl (attach to the body)
2 - FangV2.stl
1 - HeadV4_Smoothed.stl
1 - AbdomenV4_Smoothed.stl
Update
Added an alternate head with the eyes as separate shells for 2 color printers.
Update
Per request, I uploaded "HeadV4_Eyes.stl", "HeadV4_No_Eyes_Smoothed.stl", and "Raft_HeadV3_No_Eyes.stl" for slicers that need the files to be separate for 2 color printing. "HeadV4_Eyes.stl" works with the raft version of the head or without.
Also just added "HeadV4_Eyes_Surface_Only.stl". Hard to explain but if you look at it, you will see the difference.
Update
I smoothed the body so it looks more realistic and made the file sizes smaller.
"HeadV3.stl" replaced by "HeadV4_Smoothed.stl"
"HeadV3_Eyes.stl" replaced by "HeadV4_Eyes.stl"
"HeadV3_No_Eyes.stl" replaced by "HeadV4_No_Eyes_Smoothed.stl"
"HeadV3_Eyes_Surface_Only.stl" replaced by "HeadV4_Eyes_Surface_Only.stl"
"AbdomenV3.stl" replaced by "AbdomenV4_Smoothed.stl"
| AbdomenV4_Smoothed.stl | 2.5MB | |
| FangV2.stl | 270.9KB | |
| HeadV4_Eyes.stl | 1.2MB | |
| HeadV4_Eyes_Surface_Only.stl | 705.5KB | |
| HeadV4_No_Eyes_Smoothed.stl | 2.4MB | |
| HeadV4_Smoothed.stl | 3.6MB | |
| LegLongV3.stl | 627.5KB | |
| LegMediumV3.stl | 619.9KB | |
| Legs1_V3.stl | 7.2MB | |
| Legs2_V3.stl | 6.1MB | |
| LegShortV2.stl | 401.4KB | |
| LegTipLongV2.stl | 631.4KB | |
| LegTipShortV2.stl | 597.5KB | |
| Raft_AbdomenV3.stl | 4.0MB | |
| Raft_HeadV3_No_Eyes.stl | 3.9MB | |
| Raft_HeadV3_Seperate_Eyes.stl | 6.4MB | |
| Raft_Head_V3.stl | 5.0MB | |
| Raft_Legs1_V3.stl | 7.2MB | |
| Raft_Legs2_V3.stl | 6.0MB |
