So this is the rubber band gun, Wolf 01, originaly designed by Ugears. I was curious if i can scan parts and print it. It works, not as smooth but I'm still surprised.
Print with your standard settings. It is still in progress, since I got some issues with occasional jamming (especially when firing fast). Also some minor dimension adjustments are required
You will need:
100mm rubber bands (66mm in diameter)
1 piece of every part except these:
part 3_8 = 2x
part 5 and part 4 = 4x
part 15 = 2x
part 17 and 18 = 2x
part 24 = 2x
part 25 = 8x
part 26 = 2x
| 1.stl | 323.4KB | |
| 10.stl | 70.1KB | |
| 11.stl | 98.7KB | |
| 12.stl | 88.8KB | |
| 13_14.stl | 68.2KB | |
| 15.stl | 18.5KB | |
| 16.stl | 138.9KB | |
| 17.stl | 27.3KB | |
| 18.stl | 24.3KB | |
| 19.stl | 24.9KB | |
| 2.stl | 84.1KB | |
| 20.stl | 166.2KB | |
| 21.stl | 112.6KB | |
| 22.stl | 159.9KB | |
| 23.stl | 139.6KB | |
| 24.stl | 20.1KB | |
| 25.stl | 18.1KB | |
| 26.stl | 79.0KB | |
| 3_8.stl | 238.6KB | |
| 4.stl | 26.1KB | |
| 5.stl | 28.2KB | |
| 6.stl | 90.1KB | |
| 7.stl | 58.9KB | |
| 9.stl | 30.9KB | |
| Manual.pdf | 9.5MB |
