Wobbler with 3 different lips. Print it standing up with a big brim and some support on the back for stabilisation. Drop 1 4.5mm BB into the big air chamber. It will roll to the back while casting and to the front while retrieving.
For the assembling you need 0.8mm stainless spring steel wire, 2-3 split rings, hooks and 5mm eyes. For instructions look here: https://www.thingiverse.com/thing:3737328
The small lip version runs about 1-2 feet deep and has a wobbling action.
The big lip version runs about 3-4 feet deep and has a wobbling action.
The narrow lip version runs about 2-3 feet deep and has more of a rolling action.
UPDATE 07.2021
uploaded 2 stencils
PRINT WITH 100% INFILL and don´t forget the BB!
If you want to support me, check out my other lures i sell:
https://cults3d.com/en/3d-model/gadget/crankbait-fishing-lure-domi1988
https://cults3d.com/en/3d-model/gadget/fat-crankbait-easy-to-print-and-build-one-piece-print
https://cults3d.com/en/3d-model/gadget/4-piece-swimbait-fishing-lure-14cm-easy-print-and-build
| big_lip.stl | 2.5MB | |
| narrow_lip.stl | 2.4MB | |
| small_lip.stl | 2.4MB | |
| stencil1.stl | 1.2MB | |
| stencil2.stl | 1.3MB |
