Update 06/12/24: Added three hollow mags and a cap so that you can fill them with something (ball bearings, sand, old batteries...) to add some weight. Use a brim to print them securely stood up on the open end.
Update 17/11/24: Added the missing WV_Screw.STL. Apologies for missing this and big thanks to JeXLeR for pointing this out.
Here is my Wiimote pistol tribute to a real world weapon, the KRISS Vector.
I have always admired the design.
As with all my Wiimote pistols, you only require the body and trigger for it to function and pls keep in mind that because I can't predict the location of the Wiimote sensor (it needs to be above), then the in-game crosshair will never line up with the sights. I have thought about a design where the Wiimote is angled upward in the body and has some adjustability.
You will find some extra parts that I made after I did the images, like a smaller mag option (WV_Mag_Short), a shorter supressor (WV_S1_150mm) in case you have less headroom to print in and a longer stock (WV_Stock_288mm) if you have access to a 250x250mm bed.
I Hope this Wiimote Vector cosplay makes you smile :)
--PATREON & PATREON SHOP.
--https://www.patreon.com/3DFreeman
Thanks again for your continued support.
| WV_Body.stl | 1.2MB | |
| WV_Grip.stl | 271.9KB | |
| WV_M.stl | 215.2KB | |
| WV_Mag.stl | 39.5KB | |
| WV_Mag_100_Hollow.stl | 52.9KB | |
| WV_Mag_150_Hollow.stl | 53.4KB | |
| WV_Mag_200_Hollow.stl | 53.3KB | |
| WV_Mag_Cap.stl | 14.2KB | |
| WV_Mag_short.stl | 38.1KB | |
| WV_S1.stl | 690.2KB | |
| WV_S1_150mm.stl | 613.5KB | |
| WV_S2.stl | 657.8KB | |
| WV_S3.stl | 572.4KB | |
| WV_Screw.stl | 404.8KB | |
| WV_Sight.stl | 254.0KB | |
| WV_Stock.stl | 470.9KB | |
| WV_Stock_288mm.stl | 470.9KB | |
| WV_Top.stl | 442.2KB | |
| WV_Trigger.stl | 177.5KB |
