Floor Lamp
based on WLED.
It was inspired by HUE signe but less expensive.
See also: Table Lamp version
Printing:
- Base: - Infil 20%, support is required for the hidden DC jack
- Cover: - Infil 20%, support not needed, must be flipped in Slicer
- Weight-Cover: Infil 20%, support not needed, must be flipped in Slicer
Parts required:
- Alu Profile round 1,5m
- LED Stripe (not every type of stripe are working with WLED, im using WS2811 or WS2815)
- Wemos D1 Mini (or ESP32)
- 1-Relais Shield for D1 Mini
- DC Power Shield Board
- Triplet Base Shield D1 Mini
- DC Socket
- Optional - Microphone
- JST SM 4PIN / JST SM 3PIN (Depending on Stripe)
- 4 x Screw 3,0x10 Torx Countersunk Head (needed for Base)
- 1 x Screw 3,0x16 Torx Countersunk Head (needed for AluProfile)
- 6 x Screw 3,0x10 Torx Countersunk Head (needed for Weight Cover)
- 4 x Screw 2,5x6 Torx Pan Head (needed for Triplet Base)
- 2 x Round Weight 50cmØ x 2cm (in my case Brass)
Costs around € 75 depending on where the components were bought, plus filament.
Assembling:
In progress
