This is a WLED project box used for mounting a WeMos D1 Mini V4.0.0. It provides keyhole mounting to mount the box to a flat surface, making it easily removable for maintenance.
Two lids are included, one with a WLED label and one without.
Two boxes are included, one for connecting to 5v power using a VSB-C Plug to 2 Pin Bare Wire Open End Connector, and one for a typical 2.1 mm DC power panel mount socket. Both boxes include a port for a reset button.
Hardware used:
There is no panel mount for connecting the data lines to the WLED strip. I use terminal blocks for this, but am open to suggestions on how to improve this.
Fusion 360 files are included.
Wiring details can be found here on my website.
| WLED-Box-DC-Jack-v1.0.f3d | 1.1MB | |
| WLED-Box-HonycombLid.stl | 137.6KB | |
| WLED-Box-HonycombLid_WLED.stl | 147.0KB | |
| WLED-Box-USB-v1.0.stl | 137.1KB | |
| WLED-Box-USBC-v1.0.f3d | 1.1MB | |
| WLED-Box-v1.0_DC-Jack.stl | 144.3KB |
