WLED Box 1-6 8×8 Matrix 3D Printer Model
The file 'WLED Box 1-6 8×8 Matrix 3D Printer Model' is (stl) file type, size is 540.7KB.
The file 'WLED Box 1-6 8×8 Matrix 3D Printer Model' is (stl) file type, size is 540.7KB.
Housing for a WLED matrix display from 1x 8x8 matrix up to 6x 8x8 matrix.
Print the plate with white filament (as a diffuser), place it in the base and place the grid on top.
Place the 8x8 LED modules in the grid and solder them. Now place the platewithhole on top.
Solder a Wemos d1 mini to the LED matrix.
Matrix -> D1 mini:
GND -> GND
5V -> 5V
IN -> D2
| 1_base_v3.stl | 52.4KB | |
| 1_cover_v3.stl | 98.3KB | |
| 1_gitter_v3.stl | 63.2KB | |
| 1_Platehole_v3.stl | 20.4KB | |
| 1_plate_v3.stl | 684.0B | |
| 2_base_v3.stl | 73.5KB | |
| 2_cover_v3.stl | 118.2KB | |
| 2_gitter_v3.stl | 126.8KB | |
| 2_Platehole_v3.stl | 20.4KB | |
| 2_plate_v3.stl | 684.0B | |
| 3_base_v3.stl | 94.6KB | |
| 3_cover_v3.stl | 138.2KB | |
| 3_gitter_v3.stl | 189.3KB | |
| 3_Platehole_v3.stl | 20.4KB | |
| 3_plate_v3.stl | 684.0B | |
| 4_base_v3.stl | 115.7KB | |
| 4_cover_v3.stl | 158.1KB | |
| 4_gitter_v3.stl | 253.0KB | |
| 4_Platehole_v3.stl | 20.4KB | |
| 4_plate_v3.stl | 684.0B | |
| 5_base_v3.stl | 136.8KB | |
| 5_cover_v3.stl | 178.0KB | |
| 5_gitter_v3.stl | 316.1KB | |
| 5_Platehole_v3.stl | 20.4KB | |
| 5_plate_v3.stl | 684.0B | |
| 6_base_v3.stl | 157.9KB | |
| 6_cover_v3.stl | 197.9KB | |
| 6_gitter_v3.stl | 378.6KB | |
| 6_Platehole_v3.stl | 20.4KB | |
| 6_plate_v3.stl | 684.0B | |
| bigdowner_v3.stl | 22.2KB | |
| downershort_v3.stl | 11.4KB | |
| downer_v3.stl | 22.2KB |
