Wisblock Solar Node Enclosure Insert 3D Printer Model
The file 'Wisblock Solar Node Enclosure Insert 3D Printer Model' is (stl) file type, size is 36.3KB.
The file 'Wisblock Solar Node Enclosure Insert 3D Printer Model' is (stl) file type, size is 36.3KB.
PLEASE SEE THE REMIX
This is a custom design based on the original insert that comes with the LMioEtool electrical junction box (200x100x70mm) used for the Wisblock solar node as demonstrated on The Comms Channel on Youtube.
https://www.youtube.com/watch?v=B9rxjrSIt5s&list=PLshzThxhw4O5HLlxgbZoaEL_LZCBjgv-C
https://www.youtube.com/watch?v=shlttaysWJM&list=PLshzThxhw4O76SNR2Og4-bNSQke46jlov
It uses 4, 20mm standoffs/legs (see image 3) for added support and clearance to allow for an optional power switch(es) as well as routing wires and securing them out of the way.
There are 4, 2.5mm holes for standoffs for securing the Wisblock Lora module to the insert (see images 1 and 2) as well as 2 additional 2.5mm holes to allow for an optional battery protection module as show in image 1.
2 additional holes next to the Wisblock allow the connection of 2 different types of power switches, a mini rocker switch and/or a mini toggle switch (images 1 and 2).
Using the type of 2 cell battery holder shown in the picture, secured to the insert via 4, 3mm holes, there is sufficient space between the insert and the battery holder contacts to allow for the wires used to bridge the contacts (see image 3).
The insert is secured to the box with 2 M4-0.7 x 20mm machine screws (see image 1).
| Electrical_Box_Insert_5.1_final.stl | 166.6KB |
