Printed this docking station to hang alongside my desk. The assembly consists of two printable parts, the holder and the charger clamp. A full list of components can be found below.
Before assembling the docking station make sure to have inserted two M3 heat inserts in the top of the holder. The charger clamp is pushed down the ''dovetails'' on the left and right (inside the holder). Slide the USB-C cable through the hole at the bottom and attach it to the wireless fast charging charger. It is much easier to attach the cable before placing the wireless charger in the holder. Place the wireless charger as deep in the recess as possible. Now everything is in place. Use two M3 bolts from the top to tighten the charger clamp to the wireless charger.
Component list:
For inserting the heat inserts I use a ''Dremel 2000 VersaTip Soldering Iron''
https://www.bol.com/nl/p/dremel-2000-versatip-soldeerbout/9200000010662993/?s2a=
Two Din84 / ISO 1207 M3x30 bolts. You don't have to use Din 84, but you'll need fully threaded bolts, so don't buy partly threaded bolts.
Clamping_part.stl | 33.0KB | |
Clamping_part.stp | 97.8KB | |
Wireless_charging_station.stl | 103.5KB | |
Wireless_charging_station.stp | 210.6KB |