WireClip: Your Modular Wire Management System 3D Printer Model
The file 'WireClip: Your Modular Wire Management System 3D Printer Model' is (stl) file type, size is 154.5KB.
The file 'WireClip: Your Modular Wire Management System 3D Printer Model' is (stl) file type, size is 154.5KB.
Update 01/07/2017:
Uploaded new parts that fit together more easily. Added fillet to inside to improve strength (see Autodesk Inventor Stress Analysis images). I chose to use 3mm fillets because they were stronger than the 2mm fillets and they took up less space than the 4mm fillets.
Update 01/02/2017:
Parts are a bit tight when fitting together. Will upload an updated version.
The WireClip is my submission to the #RemixChallenge
Why WireClip?
We all know the hassle and danger of tangled wires. With the all-new WireClip, you now have a practical solution to your everyday wire management needs. The snap-on nature of the WireClip and the three different types of clips gives you endless ways to organize your wires. Simply print any piece you need, when you need it.
WireClip is special because you can add or remove a wire from anywhere in the assembly, whether it's in the middle or on the outside.
Future improvement ideas:
-numbered/lettered system where you put one clip on one end of the wire, and the matching clip on the other end of the wire.
-Triangular and circular clips.
Credits:
This project was inspired by the PVC pipe construction kit due to its customizability. It was also inspired by the PCB Workstation for its snap-on nature.
| WireClip_end_clip_v3.stl | 89.7KB | |
| WireClip_L-bracket_v3.stl | 185.0KB | |
| WireClip_side-bracket_v3.stl | 137.4KB | |
| WireClip_straight-bracket_v3.stl | 137.4KB | |
| WireClip_T-bracket_v3.stl | 232.7KB |
![[FIX IN DESCRIPTION] My Egg Stand 3D Printer Model](https://cdn.3axis.co/assets/a0/c1/40/a5/a0c140a5-e05b-4068-b34f-5e6f4e64105d/images/8caee0dc-43af-4dbd-9ecd-f41742596721_thumb.jpg)
