WIP- 00 Scale Alfred And Judy- The Port Of Par Twins 3D Printer Model
The file 'WIP- 00 Scale Alfred And Judy- The Port Of Par Twins 3D Printer Model' is (stl) file type, size is 1.9 MB.
The file 'WIP- 00 Scale Alfred And Judy- The Port Of Par Twins 3D Printer Model' is (stl) file type, size is 1.9 MB.
PLEASE NOTE: This is a work in progress. Print at your own risk as changes are being made constantly. If you download to modify for your own needs, you shouldn't have any problems if you know what you're doing.
Changes have been made to the engine bodies to accommodate and sit flush with custom-designed chassis. The chassis is designed to fit a Tramfabriek 0615s motor with Hornby L&Y Pug wheels and axles. The gear on the rear driving axle will need to be replaced with the custom-designed gear provided.
CUSTOM ETCHED CONNECTING RODS, CAB STEPS, CYLINDER DRAINS, AND SLIDE BARS ARE IN PROGRESS. If you wish to make your own rods, they will need to have 1.9 mm holes for the crankpins set 20mm apart.
These are body shells for 00 scale (1/76 scale) models of the two twin engines that work in the Port of Par in southern England. Though normally painted green, they are depicted here painted yellow in honor of another pair of engines bearing their likenesses. If you're wondering which is Alfred and Judy, Judy's water tank is slightly extended with rivets. Alfred's is slightly shorter, with no rivets. The design for the cab is the same across all engines.
In the smokebox and smokebox door is a hole for a 3mm x 1mm magnet to be glued in. This is to allow the door to be swapped with character faces as desired. Alternatively you could also glue the door on.
Additional optional details would include handrails (the models already contain holes for inserting knobs,) lamp irons, brake pipes, nameplates, and so on.
| bb_front_buff.stl |
| bb_front_no_buff.stl |
| bb_rear_buff.stl |
| bb_rear_no_buff.stl |
| body_alf.stl |
| body_judy.stl |
| buffer.stl |
| cab_close.stl |
| cab_open.stl |
| chassis.stl |
| chassis_retainer.stl |
| crankpinshort.stl |
| crankpin_long.stl |
| crosshead.stl |
| cylinders.stl |
| gear_axle.stl |
| gear_reduction.stl |
| insert_no_crank.stl |
| insert_w_long_crank.stl |
| insert_w_short_crank.stl |
| smokebox_door.stl |
