Build Videos
P1: https://www.youtube.com/watch?v=nPZfvoYlkRc
P2: https://www.youtube.com/watch?v=hSb7K_NrlCI
Hey everyone! This is my model of the Wingman from Apex Legends, it's pretty accurate, I've made a few videos on how I designed it and my build of it, I recommend you check it out if you plan on printing it!
I designed it to print in the fewest pieces possible with easy overhangs and bridging if you print one do post a make it would make my day!
-Takes less than a third a roll of filament (at about 15% infill)
-Is 26cm long, scaled using in-game hand comparisons. (its a bit small in real life, but accurate.)
-For the stand, print 'stand' if your bed is large enough or print 'stand A' & 'stand B' and glue them together
[FOR SMALLER PRINT BEDS]
instead of printing "main body front Left" and "main body front right", print the 4 stls with the [Smaller Printer] prefix! Hope that helps!
AND instead of printing "Top Rail" print "[Smaller printer] Top rail" front and back, Hope that helps!
[FUSION 360 FILE ADDED]
as per request, have fun!
Assembly Video: https://youtu.be/PDiCj4JRqCQ
Design Timelapse: https://www.youtube.com/watch?v=Q5mviCJdMZU
Please contact me first if you intend on selling my thing...
| Apex_Wingman_Fusion360_file.f3d | 28.0MB | |
| front_barrel.stl | 384.2KB | |
| Fully_assembled.stl | 5.8MB | |
| Fully_assembled_OBJ.obj | 4.2MB | |
| Grip.stl | 2.4MB | |
| Hammer.stl | 247.4KB | |
| Main_Body_left_back.stl | 1.1MB | |
| Main_Body_left_front.stl | 902.9KB | |
| Main_Body_right_back.stl | 1.1MB | |
| Main_Body_right_front.stl | 742.9KB | |
| Revolver.stl | 976.5KB | |
| Stand.stl | 416.8KB | |
| Stand_A.stl | 578.6KB | |
| Stand_B.stl | 41.9KB | |
| Top_Rail.stl | 639.0KB | |
| Trigger.stl | 184.7KB | |
| underbarrel.stl | 122.0KB | |
| [Smaller_Printer_Main_Body_left_front_lower.stl | 498.6KB | |
| [Smaller_Printer_Main_Body_left_front_upper.stl | 263.2KB | |
| [Smaller_Printer_Main_Body_right_front_lower.stl | 495.6KB | |
| [Smaller_Printer_Main_Body_right_front_upper.stl | 263.2KB | |
| [Smaller_Printer_Top_Rail_Back.stl | 594.1KB | |
| [Smaller_Printer_Top_Rail_Front.stl | 120.0KB |
