Wine Glass Holder With Hue Strip 3D Printer Model
The file 'Wine Glass Holder With Hue Strip 3D Printer Model' is (stl,step,f3d) file type, size is 20.1MB.
The file 'Wine Glass Holder With Hue Strip 3D Printer Model' is (stl,step,f3d) file type, size is 20.1MB.
This is the custom wine glass holder system i developed for the ladder shelf bar I created.
One version has a simple shape, another version has a grape vine like shape for visual variation, and another version is partly voronated. the voro version may be most applicable to SLA printing but i have provided it as another option here.
These should fit most glasses, but i have tested them with Ikea wine glasses and Williams and Sonoma branded wine glasses.
Fusion files provided for you to modify if you wish to make them fit different glasses.
You will have to cut and solder the hue strip together and route the wires.
One day I hope to make a better wiring solution but for now you can get by with thin wires and use clips to keep them out of the way.
| V1_3_inch_reduced.stl | 151.3KB | |
| V1_VONORI_wine_glass_holder_110mm.stl | 21.0MB | |
| V2_Wine_Glass_Holder_Body.stl | 111.2KB | |
| V4_110mm_wine_glass_holder_segment.stl | 154.2KB | |
| Wine_Glass_Holder_Segment_-_3_inch_-_Grapes.stl | 4.4MB | |
| Wine_Glass_Holder_Segment_-_3_inch_-_SImple.stl | 859.1KB | |
| Wine_Glass_Holder_Segment_-_3_inch_v15.step | 2.2MB | |
| Wine_Glass_Holder_Segment_-_3_inch_v15.stl | 2.4MB | |
| Wine_Glass_Holder_Segment_-_Simple.f3d | 555.2KB | |
| Wine_Glass_Holder_Segment_-_Simple.step | 153.8KB | |
| WINE_GLASS_HOLDER_Voronated_v0.f3d | 7.2MB | |
| WINE_GLASS_HOLDER_Voronated_v1.step | 7.7KB |
