Wine Bottle Holder With Tree Support 3D Printer Model
The file 'Wine Bottle Holder With Tree Support 3D Printer Model' is (stl) file type, size is 1.7MB.
The file 'Wine Bottle Holder With Tree Support 3D Printer Model' is (stl) file type, size is 1.7MB.
Yesterday I printed the model, but with a bottle as the main model to break it out. Since my generated tree support almost broke in the process, I designed this model to put a bottle in.
Model V1 has a wider bottle neck than V2.
I think V2 fits a little better at the neck of the bottle, but you can also adjust the neck to a bottle later by heating it with a hairdryer if you want to.
You need a slicer for the model that generates a tree support. I used Bambu Studio.
Here I had to construct something on the ground so that the part of the bottle stays in the air.
I have created V3 but I tried to pull the model from the support.
Next time I will keep it in place.
I had also sometimes a slightly different tree support again by simply repositioning the model or the angle of the model to the build plate.
I love this model. I hope you do too ;)
Here is my Instagram post for this model:
https://www.instagram.com/p/Cs4A_7sNH57/?igshid=MzRlODBiNWFlZA==
| Bottlefortreesupport.stl | 1.5MB | |
| Bottlefortreesupport_v2.stl | 1.4MB | |
| Bottlefortreesupport_v3.stl | 1.5MB |
