this model is to assist in cleaning the outside of a window.
you will need:
2*M3 screws, 20mm
4*M3 nuts
2*M3 threaded inserts
4*washers
2*M4 screws, at least 30mm
2*M4 nuts
you can look at the pictures and see how everything is connected.
you should insert the threaded inserts from the underside
T nut converter part assembly:
M3 screw>nut>Tconverter>nut>washer
you can glue the parts with superglue and the washer to the rectangular fastener
the threaded insert is only ment for the wile itself
for the main wipe assembly:
M4 screw (preferably a T screw)>the ‘c' handle>nut
here i used the nuts like threaded inserts but you can wvwn just glue the screws to the handle and not use a nut at all.
there is a space to add a wooden broom stick and secure it with a screw
| window_washer_fastener.stl | 5.6KB | |
| window_washer_handle.stl | 23.1KB | |
| window_washer_handleAfastener.3mf | 29.3KB | |
| window_washer_M3screwT.stl | 13.2KB | |
| window_washer_wipe.stl | 21.1KB | |
| window_washer_wipeAM3screwT.3mf | 28.1KB |
