Window crank fits on most models of Volkswagen company!
There is also a testpart in here that you can print and test whether the crank will fit on your pin.
Use metal washer, in case you can get it (ID > 5mm, OD 14-22mm). Otherwise print the provided washer.
See Explosion-Drawing for arrangement.
For this Model metric screws (M5) were used.
Make sure your printer is well calibrated to make that model fit tight but smoothly.
| Window_Crank_00_Crank_TESTPART.STL | 278.3KB | |
| Window_Crank_01_Cap_V2.STL | 39.0KB | |
| Window_Crank_02_Handle.stl | 419.4KB | |
| Window_Crank_03_Crank.stl | 321.7KB | |
| Window_Crank_04_Washer.stl | 38.8KB |
