Description Files (1)

Summary

WinDIY - 3d printable wind turbine

WinDIY is a wind turbine made of mostly 3D printed parts.

Features

Wind turbine build from 3D printed parts
HAWT design
Rotor diameters from 0.5 to 1.2m possible
3D printed wings
Uses a 3D printed disk generator for energy generation
Safety functions through active pitch adjustment of the wings, mechanical brake and electronic brake function via the disk generator
Can be printed using any "normal" (20x20cm bed size) FDM Printer

Pictures

WinDIY

Build instructions

You can find detailed instructions on Nerdiy.de.

General information: https://nerdiy.de/en/windiy-die-wind-turbine-aus-dem-3d-drucker/
Build the wings: https://nerdiy.de/howto-windiy-fluegel-der-windturbine-aufbauen/
Build the wind vane: https://nerdiy.de/howto-windiy-windfahne-zusammenbauen/
Build hub: https://nerdiy.de/howto-windiy-nabe-inkl-mechanik-aufbauen/
Build the rotating tower: https://nerdiy.de/howto-windiy-drehturm-aufbauen/
Build main axis: https://nerdiy.de/howto-windiy-montage-der-hauptachse/
Build pitch actuator: https://nerdiy.de/howto-windiy-pitch-aktor-zusammenbauen/

License

Unless otherwise stated, all works presented here and on Nerdiy.de that are not based on software/code are subject to the CC BY-NC-SA 4.0 license (attribution – non-commercial – dissemination under the same conditions 4.0 international).
You can find additional infos here: https://nerdiy.de/en/lizenz/

hubBaseV1.6.stl

11.1MB

WinDIY – A (mostly) 3D Printable Wind-turbine 3D Printer Model