Device for winding (removing) a fishing line with a screwdriver.
Bom:
• M5 screw
• M5 nut
The «cone» and «fixing_nut» do not require supports. The «shaft» is printed with support. The hole must be cleaned on the «fixing_nut» part. The «shaft» must be inserted into the «cone» with effort, you can drip glue so that the design results in less backlash.
| cone.stl | 341.8KB | |
| fixing_nut.stl | 430.2KB | |
| shaft.stl | 10.8KB |
