Wind turbine as terrain for your wargame. Can be used for both standard 28mm scale games and 1/285 scale games such as battletech. The wind turbine is available in two versions, stationary and rotating.To make a stationary version, just print and assemble two parts: "Rotor02_1" and "Base02_Solid". To make a rotating version you need to print the following parts: "Rotor02_1", "Base02_Rotating" and "Axis01". You will also need two size 608 bearings. You can use ready-made ones or print these, for example:https://www.thingiverse.com/thing:4628063,
https://www.thingiverse.com/thing:4821342
The assembly sequence for the rotating version is as follows:-Place bearings on both sides of the axle;
-Insert the axle with bearings into the rotor with the triangular end;
-Install the resulting assembly into the base.
All parts are printed without supports, with the exception of the rotor, which may need support in the hole for attaching the axle.I recommend painting the base and rotor prior to assembly.
| Axis01.stl | 236.9KB | |
| Base02_Rotating.stl | 16.2MB | |
| Base02_Solid.stl | 16.0MB | |
| Rotor02_1.stl | 20.3MB |
