For the generator I used 50x3mm. magnets and 210 wound coils, 50x25mm.bearing.
Printed with Anycubic Chiron,no support needed.
| 12_magnets_spinner.stl | 676.4KB | |
| coil_winding_wheel.stl | 637.2KB | |
| generator_body.stl | 1.2MB | |
| generator_wing_hood.stl | 5.0MB | |
| mounting_nut.stl | 904.1KB | |
| wind_turbine_holder.stl | 276.1KB | |
| wing.stl | 3.3MB |
