This is a simple case for the Arduino Nano and the needed cables and connectors of the fan and power supply.
For screwing the lid on the box, i used Ruthex M3 threaded inserts and M3 countersunk screws.
The Arduino fits very well by pressing softly in its recess.
Since SimHub implemented the Wind Simulation fully as "ShakeIt Wind", there is no motorshield or anything else needed, except the Arduino, a PWM fan and power supply.
For uploading the configuration to the Arduino with SimHub, see the attched image.
I took the following fan:
Noctua NF-F12 iPPC-2000 PWM, 4-Pin, 2000 RPM, 120 mm
Other parts, like the mounting of the fan itself and the fan grid for the tube, i use the files from Peter Winkler: https://www.thingiverse.com/thing:4372431
Enjoy!
| Windsimulator_Box_für_Nano_CASE.stl | 142.5KB | |
| Windsimulator_Box_für_Nano_FULL.stl | 192.7KB | |
| Windsimulator_Box_für_Nano_LID.stl | 50.3KB |
