Wind Powered Generator 3D Printer Model
The file 'Wind Powered Generator 3D Printer Model' is (stl) file type, size is 220.2KB.
The file 'Wind Powered Generator 3D Printer Model' is (stl) file type, size is 220.2KB.
I made the housing deeper to put metal plates super glued onto the rotors. the plates are 3/32 in thick I got from home depot cut with tin shears(use caution when handling plates-pinch-) put washer next to bearings. the rod is 1/4in threaded that you put into drill and file down until it fits thru bearing.6x19x6mm. the stator is thicker so wound coils can be slid into place (glue halves together). and stator is adjustable between rotors until rotors spin freely then glue.
| housingv.stl | 214.7KB | |
| Lid1.stl | 164.5KB | |
| spacer.stl | 25.1KB | |
| vawt_rotor.stl | 170.5KB | |
| vawt_stator1.stl | 204.6KB | |
| washer.stl | 25.1KB | |
| wirewind3.stl | 87.8KB |
