Wind Chime Upgrade – 3d Zen Gnome Sail – Wind Catcher

UPDATE: I added separate files of the blank wind catcher and the decorative portion so you can print in different colors and glue together if you wish.

Almost everyone has one or more wind chimes. Most come with a plain, flat sail to catch the breeze to move the clapper. Or you may need a smaller/larger, lighter/heavier sail to work better in your area.

Why not upgrade your wind chime with one of these easy to print 3d wind sails? You can adjust the size by scaling the .stl in your slicing software and adjust the weight by adjusting the infill. I would recommend a minimum of 20% infill. I printed one at 200% scale and 50% infill for a large chime I have.

Most in this series will print without supports unless noted below.

THIS ONE WILL REQUIRE SUPPORTS FOR HIS HANDS - BUT MOST WILL FALL ONTO THE BUILD PLATE - EASY CLEANUP.

If desired, print two and glue them back to back so the awesome design shows on both sides.

If you have a request for a different style (nautical, different animals, etc) just let me know and I see if I can remix one for you.

If you like this remix, check out the original models listed in the left sidebar.

I have designed almost 700 remixes of various types. If you want to search by the type, check this post as Thinigiverse has lost about half of my designs:
https://www.thingiverse.com/thing:4767394

If you like my work, I do accept tips via PayPal. Thanks!