This is a simple mount that attaches a ZWO ASIAIR to a William Optics Zenithstar 73 telescope.
It mounts on the left-hand side of the telescope (when viewed from the rear) with 2 M4 screws (10mm length).
The dovetail is secured from the side by 2 M3 screws and hex nuts. To avoid marring up the anodized dovetail, either use nylon-tipped screws or replace the aluminum dovetail with a 3D printed one (available in my other upload).
| WO_Z73_ASIAIR_Mount.f3d | 3.7MB | |
| WO_Z73_ASIAIR_Mount.stl | 1.4MB |
