Wild Bird Feeding Column 3D Printer Model
The file 'Wild Bird Feeding Column 3D Printer Model' is (stl,f3d,step) file type, size is 4.5MB.
The file 'Wild Bird Feeding Column 3D Printer Model' is (stl,f3d,step) file type, size is 4.5MB.
Wild bird feeding column printed with PETG.
roof diameter 300mm.
Also required:
1x plexigals tube 80/74mm in desired length, I use 200mm
4x M4 screw
4x EPDM sealing washers M4
1x M6 screw
1x M6 washer
1x M6 eyebolt
4x M4 melting thread
2x M6 melting thread
1x silicone adhesive
The plexiglass tube is glued into the adapters with silicone.
As you can see in the photos, I used silicone between the roof and the body and between the roof and the tube to make everything waterproof. This is not a must if the feeder column is not exposed to wind and rain.
| Adapter-bottom-FS.stl | 168.5KB | |
| Adapter-top-FS.stl | 137.9KB | |
| FS-Funnel.stl | 367.0KB | |
| lid-FS.stl | 421.0KB | |
| V2-Body-FS.stl | 1.4MB | |
| V2-Futtersaule-Klein.f3d | 2.7MB | |
| V2-Futtersaule-Klein.step | 2.5MB | |
| V2-Ring-FS.stl | 537.2KB | |
| V4-roof-FS.stl | 979.6KB |
