Wii Bar Mount For Modern TV(2023) 3D Printer Model
The file 'Wii Bar Mount For Modern TV(2023) 3D Printer Model' is (stl) file type, size is 1.2KB.
The file 'Wii Bar Mount For Modern TV(2023) 3D Printer Model' is (stl) file type, size is 1.2KB.
Needs supports to print.
I was trying to mount a USB Wii bar on top of my new Sony Bravia TV but the mount that goes on top of the tv is flat and the top of my tv was triangular. That led to the mount just falling behind my TV. Also, the bezels on my tv are almost nonexistent so I couldn't use one of the mounts that hugs the tv bezels or it would go over the screen and possibly damage it. So I designed this and decided to share it seeing as most mounts only work for older TVs. So if you have to top-mount the bar here it is. Just slide the bar in with a bit of force. It's very tight. There is cable management in the back. You will need double-sided tape for the bottom. I used 1mm thick tape which seems to conform to the bezel well for slightly different angles.
| Modern_Wii_bar_mount.stl | 5.9KB |
