Wiggly Smi (Print-in-Place Articulated Fidget Beluga) 3D Printer Model
The file 'Wiggly Smi (Print-in-Place Articulated Fidget Beluga) 3D Printer Model' is (stl) file type, size is 68.7 MB.
The file 'Wiggly Smi (Print-in-Place Articulated Fidget Beluga) 3D Printer Model' is (stl) file type, size is 68.7 MB.
Behold! Wiggly Smi! The articulated fidget beluga! I modeled him after one of my favorite childhood stuffed animals. Smi is short for Smilie :)
Wiggly Smi was inspired by the really popular fidget slugs! I wanted to make my own version that is special to me. Enjoy your new wiggly friend!
Wiggly Smi is for personal use only, no commercial use. Thank you!
UPDATE: I have added files for each of the individual segments by request! If one segment breaks or you're worried about him fusing (or you just want to make him really big), you can print the pieces one at a time. Obviously this would mean he wouldn't exactly be print in place anymore, but you should be able to pop the joints into place fairly easily. Please note that I have not personally tested printing him piece by piece, so results with this method may vary.
| Wiggly_Smi_23_with_Supports.stl |
| Wiggly_Smi_Segment_1.stl |
| Wiggly_Smi_Segment_10.stl |
| Wiggly_Smi_Segment_11.stl |
| Wiggly_Smi_Segment_12.stl |
| Wiggly_Smi_Segment_13.stl |
| Wiggly_Smi_Segment_1_Without_Supports.stl |
| Wiggly_Smi_Segment_2.stl |
| Wiggly_Smi_Segment_3.stl |
| Wiggly_Smi_Segment_4.stl |
| Wiggly_Smi_Segment_5.stl |
| Wiggly_Smi_Segment_6.stl |
| Wiggly_Smi_Segment_7.stl |
| Wiggly_Smi_Segment_8.stl |
| Wiggly_Smi_Segment_9.stl |
| Wiggly_Smi_without_Supports.stl |
