Description Files (6)

Summary

The new design can be found here.

A WiFi controlled Desk-Lamp, essential for every 3D-Printing enthusiast and a great way to get into coding.

It features an easy to use webinterface that runs on an ESP8266 that was forked from jasoncoon.

The website allows for easy access to the different patterns, brightness and power control.

Hardware

1x Wemos D1 mini is recommended, but any other ESP8266 variant should work too, but it might require an additional step-down converter.
2m WS2812B LED Strip IP30, make sure you choose IP30 any other IP rating will not fit. I would recommend buying a strip with 60 LEDs/m.
1x 3.3V to 5V Logic Level Shifter (optional, required if LEDs "glitch")
1x AWG 22, 3 pin wire
12x M3*8mm bolts
8x M3 Nuts
1x Female Power Jack
1x 5V Power Supply, Note: 100 LEDs draw around 3A

The software and detailed setup instructions can be found on GitHub:

It has many cool and modular features, which can be configured or disable individually:

40+ preconfigured animations
Sound reactive to a windows audio output using the IoT-Audio-Visualization-Center
Alexa integration
MQTT/HomeAssistant support
mDNS to be easily located in the network
Serial ambilight to be used behind a TV
WebUI with light and dark theme
OTA integration to be updated wireless

For beginners there is a setup tutorial too, please mind that the versions mentioned in the video are no longer correct.